Sewer Line Repair
Cracked, offset or root-filled sections get a targeted sewer line repair at the failure point, so you're not paying to replace pipe that's still sound.
Residential and small business sewer service
Backups, gurgling drains or a soggy yard? We fix the broken section without digging up more than we need.
Fix the cause, not the symptom
When a main sewer line fails, the signs show up all over the building: slow drains on every floor, toilets that gurgle when the washer empties, sewage odors near a floor drain, or water pooling over the line outside.
We find out exactly what failed and where before anyone picks up a shovel. Then you hear the realistic options, from clearing roots to replacing a cracked section, along with what each one costs.
Portland's long wet season is hard on aging laterals. Saturated soil shifts old joints, and roots follow the moisture into every gap, which is why a line cleared last winter often backs up again the next.
What we do
Cracked, offset or root-filled sections get a targeted sewer line repair at the failure point, so you're not paying to replace pipe that's still sound.
When the line has collapsed or broken in more than one spot, sewer line replacement puts in new pipe from the house to the street connection.
Lining or bursting the old pipe in place: trenchless sewer repair keeps driveways, trees and landscaping intact when the pipe condition allows it.
A recorded sewer scope shows the inside of the line, which helps before you buy a house, after a backup, or before you approve a repair.
High-pressure water cuts through grease, scale and roots. Hydro jetting restores full flow when buildup, not damage, is the problem.
How we work
We pinpoint the break before recommending anything, so the excavation is small and in the right place.
Spot repair, lining, bursting or full replacement. We explain what each costs, how long it lasts and how much of the yard it disturbs.
You know the cost, the section being fixed and what gets restored afterward before work begins.
We protect walkways and floors, keep excavated soil contained and leave the site cleaned up when we're done.
After the repair we run water through the line to confirm it drains the way it should.
Notes and video from the job help with future maintenance and are useful if you ever sell the property.
Typical costs
Most spot repairs run about $1,500 to $5,000. A full sewer line replacement usually costs $60 to $250 per foot, roughly $7,000 to $20,000+ for a typical line.
A sewer scope runs $150 to $400, and hydro jetting $350 to $800, or up to about $1,000 for heavy roots. Depth, pipe length, what sits on top of the line (lawn, driveway or slab) and the permit all move the final number. You get an exact price once the line has been inspected.
Backups after every heavy rain? Get the line checked before it fails.
Call (503) 221-5373Which drains are slow, when it started and whether it's one fixture or the whole house. That tells us if it's a branch line or the main.
We inspect the line from a cleanout, find the defect and mark its depth and position on the surface.
You get the options, the trade-offs and a written price before any work begins.
We make the repair, run water through the line and confirm it's flowing before we backfill.
About us
Sewer Repair Portland Oregon is a local sewer crew working with homeowners and small businesses. Most calls start the same way: a backup that keeps coming back, a smell that won't go away, or a home inspector's note about the sewer lateral.
Our job is to tell you what's actually wrong and what it will take to fix it. Sometimes that's a cleaning; sometimes it's a section of new pipe. Either way, you hear the options and the price before you spend anything.

Where we work
Most of our work is right here in the city, from close-in neighborhoods to the west side. We also take calls for Milwaukie sewer repair and Tigard sewer repair, plus nearby areas like Garden Home, Raleigh Hills and Oak Grove.
Before you call
If several fixtures back up at once, or the lowest drain in the house overflows when the washer empties, the main line is the likely problem. One slow sink is usually a branch line.
Not always. Many breaks are fixed through one small excavation at the marked spot, and trenchless methods need only small access pits. Full trenches are for lines that have failed along their length.
Yes. Older homes often have clay, cast iron or a mix of materials, and the repair depends on the condition of each joint.
Usually, yes. Most sewer line repair and replacement needs a plumbing permit and an inspection before the trench is closed.
Stop running water if drains are backing up: no laundry, showers or dishwasher. Keep people and pets away from any spilled sewage.
Yes. We handle sewer lines for homes and small commercial buildings such as shops, offices and small rental properties.
Stop the backups
Call and tell us what's happening. We'll find the cause, tell you what it costs to fix, and get the line working again.